Features
Suitable for producing hot filling bottle.
Can be connected with filling machine directly. Saving the investment on the bottle unscrembling machine.
Adopting high technology Micro PLC controller. Ensure the machine working properly and stable.
Sole heating electricity saving design.50% electricity saving comparing to the other machine.
Specially mould locking clamping system,1.5 times efficiency. Network-service help system for the blow molding machine.
Specifications
| Bottle specification | Machine model | Model 3000A-III hot fill bottle blow molding machine | |||||
| cavity | 4 | ||||||
| bottle volume | 0.5L | 1L | 1.5L | 2L | |||
| theorectical Output | Water bottle | 4800-5100Pcs/h | 3600-4000 Pcs/h | 3200-3800Pcs/h | 3100-3500 Pcs/h | ||
| Hot fill bottle | 1800pcs/h | 1600 pcs/h | 1300 pcs/h | 1000pcs/h | |||
| max bottle neck diemession | 40mm | ||||||
| Max bottle diameter | 110mm | ||||||
| Max bottle heigh | 320mm | ||||||
| Electrcity kw | Infra-lamp pcs | 36Pcs | |||||
| Max heating power KW | 72Kw | ||||||
| Total electricity KW | 75Kw | ||||||
| Actual power comsumption kw | 25-28Kw | 28-33Kw | 30-35Kw | 32-38Kw | |||
| Air pressure | working air pressure | <=1.0 Mpa | <=1.0 Mpa | <=1.0 Mpa | <=1.0 Mpa | ||
| Low air pressure comsumption | 1600Ltr/min | ||||||
| Blowing air presure | <=4.0 Mpa | <=4.0 Mpa | <=4.0 Mpa | <=4.0 Mpa | |||
| High air comsumption | Water | 1800-2200 Ltr/min | 2000-2600 Ltr/min | 2500-3000 Ltr/min | 2500-3200 Ltr/min | ||
| Hot | 3600-4400 Ltr/min | 4000-5200 Ltr/min | 5000-6000 Ltr/min | 5000-6400 Ltr/min | |||
| Cooling water | working pressure | 0.5-0.6.Mpa | 0.5-0.6.Mpa | 0.5-0.6.Mpa | 0.5-0.6.Mpa | ||
| temperature | 8-12℃ | 8-12℃ | 8-12℃ | 8-12℃ | |||
| Water flow capacity | 20Ltr/min | 30Ltr/min | 40Ltr/min | 40Ltr/min | |||
| Oil heating unit | Power | 5kw 3 phase | |||||
| Heating power | 1L/mintue | ||||||
| Size | 630x325x745 | ||||||
| Machine | machine size | 3.5x1.5x2.7（m） | |||||
| machine weight Ton | 4.2t | ||||||
