LWAMS600 Automatic Multi-function Magnetic Stripe Mountin Machine

Features

Coiled Magnetic Strip Can Be  Mounted On The PET Or PVC Film Or Sheet Material When The Recycling System Will Recycle The Magnetic Strip Foil. After The Mounting Finished, Cutting It  Into Prearrange Length. The Magnetic Strip Can Be Mounted And Cut  Synchronously. The Whole Process Finished Automatically，With Stable  Working Condition.
Range For Apply Material：
Coil Film：
Thickness:0.04-0.2mm.
Sheet：
Thickness:0.25-0.8mm.

1、The System Is Automatically Controlled By PLC And Operated On Touch  Screen Human-Machine Inter Face.
2、Feed Sending By  Driven Servo-Motor, Which Controls Running Speed And The Length Of The Feeding Film Both Speed And Length Are Adjusted.
3、Several Groups  Roller Impact The Structure, The Pressure Of The Cylinder Can Be Adjusted To Insure The Covered Film Is Parallel And Orderliness.
4、The Motivity For  The Film Cutting Is Driven By Cylinder, With Simple Structure And Good Working State.
5、The Recycling  System Recycles The Magnetic Stripe Foil Automatically.
6、Use Barometric  Pressure Spindle Material Loading And Unloading System, It Is Convenient To Load And Upload Material.
7、Heating  Temperature Controlling Method：Use The Heater To Heat Up And The Imported Thermocouple Cooperating With Temperature Controller To Control The Temperature，It Is Easy To Set  And The Temperature Controller Is Precise.
8、The Temperature And Pressure Of Each Magnetic Laying Head Can Be Adjusted Solely.
9、Use Automatic Tension Control System To Send Feeds, So Thati Conveying Of Film Can Be  Stable.
10、It Realizes Thr  Processing Of Coil Film To Sheet Material Or Sheet  Material To Sheet Material Stripe Laying.

Specifications

LWAMS800   AutomaticMagnetic Stripe Mounting Machine

Features

Coiled Magnetic Strip Was Mounted  On The Cover Layer Automatically When The Recycling System Recycles The  Magnetic Strip Foil. The Magnetic Strip And Sheet Can Be Mounted And Cut Into  Prearrange Length(Add Feeding Model),Or Rewind The Film.(Add Indusim Device)

1、The Running Speed Depends On The Quality Of Indusium Film, The Maximum  Speed Can Reach 10m/Min, And The Normal Speed Is 5-7m/Min.
2、The System Is  Controlled By PLC Program Automatically And Is Operated By On Touch Control  Screen.
3、Temperature And  Pressure Of Roller Can Be Adjusted Independently.
4、Heating Tube Heatd  Temperature And Imported Temperature Sensing Probe Match With Temperature  Control Module Control Temperature, Its Setting Is Easy, Temperature Control  Is Accurate.
5、Adopt Air Pressure  Spindle Loading System, So As To Make Loading And Unloading Of Roll Film  Convenient.
6、Adopt Automatic  Tensile Force Control System Sends Feeds, Make Conveying Of Roll Film  Flat.
7、Machine Is Equiped  With Muti-Group Roller Compressing Device, The Pressure Of The Cylinder Can  Be Adjusted So As To Insure The Covered Film Is Parallel And Orderliness.
8、The Roller Can Adjust  The Press Place, Ensure Quality And Prolong Service Life.
9、Space Among  Magnetic Stripe Can Be Adjusted.
10、Magnetic Stripe Pad  Foil Is Collected By Winding Institution.

Specifications