Application:

This high speed slitting machine is suitable for PET, OPP, CPP, PE non-woven fabric, PVC and optical material, film roll paper and various materials.

Characteristic:

I. Host machine part

1. The main machine of the equipment adopts steel plate material as the center for secondary processing and finalization.

2. Transmission spindle is made of seamless steel tube, and the surface hardening chroming dynamic balance processing is processed.

3. Aluminum alloy guide roller and rubber roller are used to complete the feeding guide roller.

4. The driving mode of main engine is synchronous belt and synchronous wheel.

5. The main engine adopts automatic pushing mode, which can effectively save labor.

6 main engine adopts radium spotlight to improve the efficiency and time of paper tube.

II. Discharging part

1. The discharging mechanism is a connected discharging frame

2. Shaftless pneumatic automatic feeding is adopted for discharging, which can effectively save labor and is convenient and simple to operate

3. Equipped with a set of adjusting rod device, which can be adjusted by hand wheel

4. Unwinding adopts magnetic powder brake

5. Use ARISE brand corrective device to achieve the material edge and line tracking (other brands can be selected), The edge correction adopts ARISE brand to realize the material edge tracking and line tracking.

III. Rewinding part

1. Rewinding shaft is equipped with 2 pcs 3-inch pneumatic friction shafts.

2. The locking mode is controlled by inflation mode.

3.The rewinding tension is controlled by the imported SMC electrician proportional valve.

4. The slitter adopts the round cutter to cut the flat knife 10 pcs, and the round knife 10 pcs.

5. Equipped with one set of edge blowing device.

6. It has the function of discharging and pushing automatically.

7.It is equipped with automatic rotating sub frame for unloading, which saves time and effort and effectively improves work efficiency.

8. Equipped with a waste edge winder.

IV. Electrical part

1. The host adopts a driver.

2. One main motor.

3. Two drivers are used for winding.

4. Two motors of main engine.

5. LPC adopts analog quantity to control servo motor.

6. Using imported PLC to achieve accurate and stable control function, only need to input the thickness of raw materials and broadband diameter and speed. All the following work is done automatically by computer.

Model 1300 main technical parameters

1. Material width 1300mm

2. Material diameter ￠800mm

3. Rewinding diameter ￠600mm

4. Inner dia.of paper core 3inch 6inch

5. The slitting speed is 10-400m/min

6. Minimum slitting width: 25mm

7. Total power 15kW

8. Machine dimension  2200X2800X1840mm

Main parts brand:

Accessories: